Ordering DAYTRONIC
DAYTRONIC Sets & Product Codes
Option 1: DAYTRONIC Standard Set (3 filter caps)
 This is the default option, giving you everything you
need and the flexibility to adapt to the required lightlevel with a simple change of the filter cap. Photosensor and 3 filter caps are packed in individual small plastic sachets.
Each set contains
- a DAYTRONIC ballast,
- the photo sensor, complete with 3 interchangeable filter caps (precalibrated to standard guaranteed light levels of approx. 150 /350 / 500 lux in
2.80m ceiling height)
- a cover cap to place over the light sensor in case it receives light from the rear, to avoid false readings.
Option 2: DAYTRONIC Project Set (1 selected filter cap only)
 Similar to the Standard Set but
with only the 1 filter cap that you need in your project - select this option if you know which filter cap you need for your project (try it out with
Standard Set first). Contains ballast, 1 filter cap and the cover cap. Sensors are bulk-packed, not in individual sachets.
Order Codes
DAYTRONIC is currently available for a range of lamp sizes in nominal voltags of 220V-240V. The following list is an extract only - If you require a size that is not listed below, just drop us an email.
| 1 x 36W T8 or 1 x 36W PL |
110136 |
120136 |
| 2 x 36W T8 or 2 x 36W PL |
110236 |
120236 |
| 1 x 58W T8 or 1 x 55W PL |
110158 |
120158 |
| 2 x 58W T8 or 2 x 55W PL |
110258 |
120258 |
| 1 x 28W T5 |
110128 |
120128 |
| 2 x 28W T5 |
110228 |
120228 |
| 1 x 35W T5 |
110135 |
120135 |
| 2 x 35W T5 |
110235 |
120235 |
| 1 x 49W T5 |
110149 |
120149 |
| 2 x 49W T5 |
110249 |
120249 |
| 1 x 54W T5 |
110154 |
120154 |
| 2 x 54W T5 |
110254 |
120254 |
Optional Accessories
These 2 accessories are useful when you can not install the photosensor directly into the fixture body:
|
Louver clip - for mounting the DAYTRONIC sensor onto the louver of the fixture (retrofitting)
Product code: 100312 |
|
Ceiling clip - for mounting the DAYTRONIC sensor into the ceiling next to the fixture
Product code: 100542 |
Warranty
DAYTRONIC comes with a 3 years manufacturer's warranty.
Shipping
We ship worldwide from Germany with any transport partner of your choice.
The most cost-effective companies are usually TNT Economy or UPS Saver (for small quantities), SCHENKER Air Freight (medium quantities) and SCHENKER Sea Freight (large quantities).
Package Size, Dimensions, Weight
 DAYTRONIC comes in boxes of
72 units (any one size / wattage, for example all 2 x 28W).
Weight & dimensions of 1 box of single-lamp ballasts:
13.5 kg - 39 x 27 x 26 cm
Weight & dimensions of 1 box of double-lamp ballasts:
20.5 kg - 39 x 27 x 28 cm
Minimum Ordering Quantity
1 box (72 pcs) is the minimum ordering quantity, except for samples.
Lead Times
Small and medium orders can usually be fulfilled immediately out of existing stock.
However, when this is not possible, our German factory is very flexible and can react quickly. In case of a new manufacturing batch, calculate with a lead time of 5 to 7 weeks.
Customs information, HS classification
The standard classification for ballasts is "85041080 Ballasts for discharge lamps or tubes".
Contact the DAYTRONIC team with your project inquiry >>
|
